HMI Elements 1901 Wireless Access Point

Wireless Access Point HMI Elements 1901 Lightweight ATEX, IECEx, CSA and AEx wireless access point. Certified for use in in Class I Zone 1 Tri-band wireless Wi-Fi IEEE 802.11 b/g & Super AG Up to 108Mbps ( Super AG mode) 4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication MAC address filtering, SSID broadcast control

Beskrivelse

The Smart-Ex 1901 Wi-Fi Access Point is designed to be operated within a hazardous area.

  • ATEX Zone 1 or 2, IECEx, CSA and AEx certified Class I Zone 1 Wireless Access Point
  • No need for heavy, and expensive Ex d solution
  • Can be used as Access Point, Bridge or repeater
  • Fully configurable to meet statutory Wi-Fi requirements worldwide
  • Quick and easy set-up
  • Intrinsically safe antenna and Ethernet 10/100 Mbps ports
  • Inexpensive way to extend your WiFi network into a hazardous area.

Tilleggsinformasjon

TYPICAL EX CODE

Ex II (2) G D
Ex e mb ib [ib Gb] IIB T4 Gb
Ex tb IIIB T135°C Db IP66
Class I, Zone 1, AEx e mb ib [ib Gb] IIB T4 Gb
Zone 21 Ex tb IIIB T135°C Db IP66

POWER REQUIREMENTS

100 – 240V, 50/60Hz AC, current consumption 0.1A for 230V AC input, 0.2A for 120V AC input

OPERATING TEMPERATURE

-40°C to +60°C (-40°F to +140°F)

STORAGE TEMPERATURE

-40°C to +70°C (-40°F to +158°F)

INGRESS PROTECTION

IP66 / NEMA 4X

INTERFACE

IS Ethernet and power via glands
IS antenna output

MAXIMUM TRANSMIT OUTPUT POWER

20dBm (100mW)

RECEIVER SENSITIVITY 802.11g

54Mbps: -73dBm
6Mbps: -92dBm

RECEIVER SENSITIVITY 802.11b

11Mbps: -90dBm
1Mbps: -95dBm

RADIO DATA RATE

Up to 108Mbps ( Super AG mode)

SECURITY

4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication, MAC address filtering, SSID broadcast control

WEIGHT & SIZE

5.4kg / 12lbs
232(h) x 202(w) x 111(d) mm (9.13 x 7.95 x 4.37 inches)

Nedlastinger

Smart-Ex 1901 WAP